How to use Gamecube Controller on Steam?

how to use gamecube controller on steam

If you are looking for tips on how to use GameCube controller on steam, this article is going to show you how it is done. Gamecube, the popular online video game system was released in 2021. Although it was released earlier, the latest version is the ‘HD’ version which can support high resolutions and also provide better audio and video.

Do you know you can use a Gamecube Controller for almost every game that supports Xbox 360 Controller?

We have made it easy for you by making a guide for you to know how to use GameCube Controller on Steam.

First of All, make sure you have a USB GameCube Controller Adapter. (Don’t worry if you don’t have it, you can get it for you here GameCube Controller Adapter )

This Gaming Guide is not only for the Official GameCube Adapters but also for other unofficial adapters that support WUP-028 i.e Majority of the Adapters like Mayflash use this.

Follow this Instruction Properly to use GameCube Controller on Steam:

How to use gameCube Controller on PC?

Steam is one of the famous gaming applications available on Windows PC. Maybe Some of you were ended up in this page While searching for how to use GameCube Controller on PC.  Don’t Get Confused, you’re in the right place. You are supposed to follow the same step mentioned below to use the GameCube controller on PC.

So, Better Follow the enlisted instructions properly to use GameCube Controller on PC and Steam.

Step 1: Download and Install Wii U GCN USB Driver/vJoy Device Driver

First of All, Visit Massive’s GameCube Controller Adapter Blog (Link) and Download the latest version of Wii U GCN USB Driver for your System.


how to use gamecube controller on steam

After Downloading, You can install the driver properly by following these instructions:

Left Click On Setup Files and Click “Open“. how to use a gamecube controller on steam

Click “Next gamecube controller steam

Choose the Installation Folder

steam gamecube controller

Choose the Shortcut Preference

use gamecube controller on steam

Select on Check box if you want to create Shortcut on Desktop (It’s not necessary, though). So, It is recommended to Uncheck the folder.

gamecube controller for steam

After Following these Steps, You should be able to see the “Install” Button instead of Next in the Installation Prompt and Click “Install.”

steam mayflash adapter

Now, Program will go through a brief Installation Process and Pop-up on the screen, as shown in the image below.

(At this point, Make Sure that You have “WUP-028” selected in the dropdown box instead of “GAMING MOUSE G402.

how to play steam games with a gamecube controller

After Selecting “WUP-028” in Drop Down Box, Click on the “Replace Driver” button.

using gamecube controller on steam

You Should Shortly Receive the Below Message after following the given instructions.

use gamecube controller on pc

After Closing the Window, Installation Prompt for the vJoy Device Driver will appear on your screen. Click “Next

gamecube controller steam games

In the next Step, Check all the Checkboxes and Click on “Next.”

steam games with gamecube controller

Then, Click on “Install

can you use a gamecube controller on steam

Sometimes, You may be presented with a Window Security Prompt. If So, Click on the “Install” button Again.

x360ce gamecube

After this, you’ll get another successful install prompt.

gamecube controller on steam

Note: You may receive the error message after installation. Don’t Worry and Ignore the Message; It Doesn’t affect the Functionality.

using wii u gamecube adapter on pc

After this, Step 1 is Completed Successfully. This Step was followed to ensure that your Computer/PC recognized GameCube Controller.

The same steps should be followed to use GameCube Controller on Dolphin.

Additional Step (Recommended)

After completion of Step 1, It is recommended to

  1. Download and Install the latest Microsoft .NET framework using this Link: Click Here
  2. After Installing, Restart your PC to make sure the System fully recognizes the software installed.

Step 2: Install and Download x360ce

In this step, we’re going to get your adapter and controllers recognized as Xbox 360 Gamepads using the X360ce GameCube Configuration.

It features steam to pick them up for its library of 360+ Compatible Games.

Firstly, Visit X360ce Website using this x360ce website.

vjoy gamecube

 

You can see two different download link on the top of the pages. One for 32-Bit Games and the other for 64-Bit Games. Download both of them and save them on their Respective Folder.

After that, Unzip both of them into a separate folder for different versions.

Unzipped version for the x32 version is given below.

gamecube games on steam

After Unzipping, You should install both versions Separately. The Process is the same for both 32-Bit and 64-Bit Versions. For Reference, We’ve used a 32-bit one to show you how to install x360ce on your PC.

Now, Click on the 32-Bit Setup files, and you’ll be presented with the below warning.

Click on the “Create” button, and it will automatically generate the necessary file itself and close the warning.

use mayflash adapter with steam

Once that’s done, you’ll receive the below window. This means that the program picking up your “vJoy Device” (i.e., Gamecube Adapter Controller) and recognizing it needs to be configured.

Check-In on the “Search the internet” box as shown in the Figure, and then click on “Next.”

x360ce gamecube controller

After that, It’ll automatically search on the Internet for the necessary x360ce Controller Driver.

Then, You’ll receive the below Window, Click “Finish.

Note: After Clicking Finish, You may receive another “New Device Detected” window. You need not worry; This is just the same thing happening for each of your adapter Ports. Just click “Next” and “Finish” multiple (usually 4) times until it has concluded.

how to use mayflash gamecube adapter on steam

Once these are done, you’ll get the window as shown in the figure.

You should Notice 4 green squares next to each controller. That’s x30ce picking up your adapter. Try restarting if you don’t see green squares.

wup-028 driver error

Step 3: Enable Gamecube Driver / Set-Up x360ce

Keeping the x360ce window Open, Open Wii U GCN Adapter. For that, Press on Window Key and type “GCN,” and the Wii U USB GCN Adapter will appear in the search as shown in the image below:

gamecube controller mapping

You’ll see the window as shown below once you open the software. Click “Start.

steam link gamecube controller

The below message (or some similar notification of success) will appear on Screen.

gamecube controller layout for xbox 360

Now, Press Alt + Tab to return to x360ce Window Screen. You can do that by Mouse as well.

wii u gc adapter pc

With your controller plugged into port 1, on the “controller 1” tab, you will now see the Xbox 360 controller buttons on your screen respond when you press down on the GameCube pad and analog stick!

Awesome! Lastly, we need to change some of the analog stick sensitivity settings.

For each of the controllers (1-4), Go to the “Left thumb” tab and change the Anti-Dead Zone settings to 80% and the Dead Zone settings to 30%.

This is done to ensure that your analog stick behaves exactly like it would on the Wii U/Nintendo Switch.

vjoy gamecube adapter

And Step 3 is Completed.

Note: Make Sure to complete the same setup similarly for the x64 Version.

Step 4: Copy Necessary files to Steam Game Folder

You’re so close to learning completely how to use GameCube Controller on Steam. The last step you should follow to use the GameCube controller on steam is copying the x360ce files into the game folder.

After Completing Step 3, Visit the x360ce folder ( Either 32-bit or 64-bit), and you should see 3 files as shown in the image below:

steam games with gamecube controller

Now, We should Copy these files to the game’s root stream folder.

Most of the times, Game’s root folder lies on “Local Disk (C:) – > Program Files (x86) – > Steam -> Steam apps – > Common – > “Game Name

It is not necessary to have the same directory. You can have a look around in your files or search by Pressing the Windows key, and I hope you’ll find your game’s root folder

For example:

I am using Super meat Boy

gamecube controller software

Super Meat Boy is one of the famous 32-Bit Game.

We need to copy the 3 32-bit x360ce files and paste them into the Super Meat Boy root folder; it should then look like the below.

(This the game to recognize the “Xbox 360” controller.)

  driver for gamecube adapter

That’s All

Once you completed Step 4, Open the game via Steam, and you should now have a working GCN controller to use with PC games.

Confused between 32-bit Games and 64-Bit Games?

You can search on Google to know about the Game’s bit.

Alternate Method:

If you’re don’t know and want to know how you know whether a game is 32 or 64-bit, open the x360ce .exe file once you have put the 3 files in the game folder.

If it is the wrong bit-type, you should get a warning message and replace the 3 files with the other bit version.

The image below is me trying to put the 64-bit x360ce version in the Super Meat Boy directory as an example:

gamecube controller rocket league

Still Not Working

After following all the instructions mentioned above, if still, you aren’t able to play. It is recommended to try the following step-by-step.

  1. Start from the beginning, ensuring you complete the optional/recommended sections (restarting after step 1, etc).
  2. Check out the alternative option below for non-Steam games (will work with Steam games also).
  3. If None of the methods works, the problem may be with GameCube Controller Adapter. Try to Borrow one from your friends to check.

Most Common Issues/Problems

If you want to know how to use GameCube Controller on Steam, It is necessary to know common issues/problems that other gamers faced before. one of the most common issues users reported is that some parts of the game are not responsive enough. Other users found that they are not able to make use of all the features of their controllers.

The Gamecube itself was criticized because it had some issues when using the device in steam games. It did not support dual-screen gaming, and some users reported that they could not see the other player in a first-person view in the game.

However, the company has released an updated version of the device, which has fixed most reported issues. Dualshock also received criticism for having an inadequate response. These two controllers are the only ones that work well with the Gamecube itself, although other manufactures are producing updated models with dual screens and better response.

Video Tutorial: How To Use Gamecube Controller On Steam?​

Verdict

If still you’re not able to play game on steams using GameCube Controller, even after following all the instructions of this How to use GameCube Controller on Steam? article, Feel free to Comment Down Or, E-mail Us, We’d love to help you make your Gaming Experience Hassle Free.

NOTE:  Steam is the Software available in the PC. So, This Guide also help the people who don’t know how to how to use GameCube Controller on PC.

October 2021 Update

There isn’t any updated method for connecting GameCube Controller with Steam. We’re getting lots of messages from people that they weren’t still able to know how to use a GameCube controller on steam. We always wanted to help gamers.

It isn’t easy and affordable for people to buy gaming peripherals for each games, So This article is solely written for those people who want to use the existing GameCube Controller on Steam.